• Home\
  • ISC Stryder Foot Ascender Right
Image for ISC Stryder Foot Ascender Right from Bishop Company
+ / - Hover over image to Zoom

Other Views

ISC Stryder Foot Ascender Right SKU: RP227A1
Buy 3 and save $7.78 each

ISC Stryder Foot Ascender Right 5/16" - 1/2" Capacity

Add to Cart
Available Online
In-Stock In-Stock
Available In-Store
Select Store


ISC Stryder Foot Ascender Right

ISC Stryder Foot Ascender Right  5/16" - 1/2" Capacity

The ISC STRYDER Foot Ascender has been designed following extensive feedback from many industry users. During the development of the STRYDER, durability and functionality were at the top of the priority list!  The STRYDER utilises tried & tested geometry, to provide a smooth upward movement and positive engagement on the rope.

Features & Benefits:

Cam-face & Spring Tension
STRYDER utilises the same unique Stainless Steel cam used in our Hand Ascender.  The coned cam-face allows positive engagement on the rope for a firm and reliable grip, with minimal wear to the sheath.  Great engineering attention was placed on the spring, which has been meticulously trialled to ensure that it offered sufficient tension (so as not to easily ‘pop-off’), but still allow the device to move freely upwards without towing the trailing rope.

Foot-operable Cam Lever
The foot-operable cam lever can be used to easily open and close (engage/disengage)  the cam.  The cam lever can also be hooked over the body of the device (see photo above), to hold the cam in the open (disengaged) position.  

Removable Cam Lever:  The foot lever can also be removed.  Removing the foot lever allows a greater range of pivot of the cam.  This in turn allows the user to deliberately remove the rope from the device, by using a kick technique.

Mounting Strap
Abrasion Resistant:  The STRYDER mounting strap and protective under-foot sleeve are made from a specifically developed webbing, which has undergone extensive abrasion testing and field tests have shown superior durability in harsh conditions.

Fully Adjustable: The STRYDER is fully adjustable on both the horizontal and vertical straps, allowing the user to position the cam body on the boot, according to preference.

Creep-free Webbing:  The combination of the webbing design and the design of the mounting slots & buckles ensure that once adjusted to the desired position, (using the horizontal and vertical adjustment buckles), the STRYDER should remain in position throughout use.

Easy to Fit/Remove: The main Strap buckle is tightened by firmly pulling the webbing strap; and is released by pulling the toggle upwards.  The special design of the anti-slip buckle prevents unwanted strap loosening.


Rope Range: 8-13mm  (5/16 - 1/2")
Dimensions: 75 x 52 x 25mm (3 x 2 x 1")
Weight: 198g (7oz)
Material: Aluminium (Anodised)
MBS: 2.5kN (562lbf)
WLL: 140kg (308lb)

See the attachments tab above for downloadable details on this product.

Attachments (  1 - 1 of 1  )